Motion-sound SW-15 Manuale Utente Scaricare il pdf

SW-15

POWERED SUBWOOFER

-INTRODUCTION-

The Motion Sound SW-15 subwoofer is specifically designed to complement the sound of “on

stage” keyboard amplifiers and up to 500 watt PA systems. The front panel controls and inputs

are easily accessible providing “on stage” style adjustment and operation.

Although operation may seem intuitive, we suggest that you read this manual for helpful tips

and/or details about controls and operation of the SW-15 in various venues and environments.

-WARNING-

• THE SW-15 CAN PRODUCE HIGH SOUND PRESSURE LEVELS. HEARING

PROTECTION IS ADVISED

• THE SW-15 MUST BE EARTHED FOR SAFE OPERATION.

-SPECIFICATIONS-

XLR ¼” inputs design range: 2.5 volts RMS

Minimum 300 millivolts RMS

Maximum 5 volts RMS

Input Impedance 10K ohms/100pf

Power Amplifier 200 watts

Frequency response 40-300 Hz

Speaker Eminence Delta 15LF 400 Watt

Caster Set Removable caster set with sockets

Power Voltage Watts Frequency Fuse (slo-blo)

US 117 VAC 400 50/60 Hz 5 Amp

Europe/Australia 220-240 VAC 400 50/60 Hz 2.5 Amp

Japan 100 VAC 400 50/60 Hz 5 Amp

1 2 3 4 5 6

1 SW-15 POWERED SUBWOOFER -INTRODUCTION- The Motion Sound SW-15 subwoofer is specifically designed to complement the sound of “on stage” keyboar

2 Fuse Located in AC inlet module Finish/Cabinet Two part polymer “polymaric™” on MDF Dimensions 21” Height – 24.5 Width – 16 ¾” Depth Inde

3 -XLR Input: Standard balanced input wiring with a phase switch and volume control. Pin 1-ground Pin 2-hot Pin 3=neutral -EQ- The

4 -MOTION SOUND AMPLIFIERS- -CAUTION! DO NOT CONNECT SPEAKER OUTPUTS TO THE SW-15 Volume, phase, and EQ will vary with ve

5 -MONO PA- If your mixer does not have an auxiliary output, connect one of the left or right line outputs to the SW-15, use a “Y splitter” if neede

Nessun commento

Motion-sound SW-15 Manuale Utente